NT02 RFID Nail Tag |
|
| |
| NT02 RFID Nail Tag with I CODE SLI Chip
I CODE SLI(I CODE 2): 13.56MHZ 1K BIT R/W NXP ISO15693 ISO18000-3
- Chip Type: I CODE SLI
- Standards: ISO15693 or ISO18000-3
- Operating Frequency: 13.56MHz(HF)
- Memory: 1024Bit
- Function: Read/Write
- Reading distance: 2-10cm (Dependent upon reader)
- Size: 36.5x 6.0mm
- Weight: 2.8g
- Housing material: IP68. Nylon shell, fill with epoxy
- Operating Temperature: -25¡ãC to +75¡ãC
- Storage Temperature: -25¡ãC to +85¡ãC
- Install methord: Thwack the nail tag by a rubber hammer after drilling a hole
Applications:
- Tree Identification
- Asset Tracking
- Article ID
- Logistic & Inventory
Chips Option:
1. Low Frequency (LF): 125KHz: TK4100, EM4200, EM4305, T5577, HID 26BIT.
2. High Frequency (HF): 13.56MHz: Mifare 1K S50, Mifare 4K S70, I CODE SLI, I CODE SLIX, Ultrglight,Ultrglight C, NTAG 203, NTAG 213, NTAG 215, NTAG 216.
RFID nail tag is applicable for the management of trees, cement products, plastic products, wood products and other non-metallic products. It can be used in wet and chemical environment for its corrosion resistant feature. The top of the nail tag is filled with epoxy, so that the transponder is completely waterproof and dustproof.
|
|
|
